Home » E-shop » Discounts and outlet » Vestax VRX-2000 JP

Vestax VRX-2000 JP

Vestax VRX-2000 (JP) vinyl cutting machine is an innovative machine for the experienced professional musician. Can give you superb results in the making of long-lasting vinyl records. To achieve such results, please remember that the mastering process of vinyl records requires skill and a basic understanding of complicated audio waveforms. Product is modified from JP network AC~110V to AC~230V and refurbishing.

Code: 4516184221000

€ 3,951.00 ~~€ 4,390.00~~

10%

Availability: at the supplier 1 pc

Expected:

December 2024

PRODUCT DESCRIPTION:

The VRX-2000 (JP) vinyl cutting machine can give you superb results in the making of long-lasting vinyl records. To achieve such results, please remember that the mastering process of vinyl records requires skill and a basic understanding of complicated audio waveforms. Cutting vinyl from a cassette-based multi-track recording or a stereo cassette recorder should prove to be straight forward, as the frequency response of cassette-based music is not as intense as that of a CD. Cutting from professionally mastered CDs that have good equalization and compression should also give excellent results. However, recording from some CDs (for example, CDs from home studio set-ups) may provide difficulties. This is due to the fact that these recordings sometimes have very wide frequency ranges, and have not been prepared professionally for mass-production or broadcast. Please study and understand compressors and limiters and how to use equalizers to get the best result from your Vestax VRX-2000. view full description »

The VRX-2000 head frequency equalisation is equipped 3 Band EQ. The manner by which the cutting head reacts to various frequencies will affect the final output. Basically, the cutting head is like a very small yet powerful speaker when it reacts to various s ound frequencies. Extreme frequencies will cause it to move rathers everely, with that movement being further reflected in the sound recorded. The Vestax VRX-2000, however, utilizes a standard graphic EQ system to compensate for extreme incoming signal curves. This system is aurally difficult and requires hours of practice and experimentation to get it perfect over and over again. The cutting head has 2 magnetic drivers separated by a 90 degree angle creating a V shape. This layout is optimum for stereo signal recording with the best possible channel separation, and best balance.

The special blank vinyl for the VRX-2000 has a similar durability of commercial vinyl, but a record cut in improper circumstances/condition may have less durability than usual. The life of the cutting stylus is approximately between 200-300 minutes (depending on the cutting pressure used and the level of stylus heat). Vestax VRX-2000 has a built-in limiter bypass switch: turns the internal compressor limiter ON or OFF. Must always be in on position unless external compressor limiter devices are used in the cutting process. Input level select switch: adjusts the input gain +4dB / 0dB/ -10dB and Phono level output jacks: standard RCA L/R output jacks for playback. On rear side of Vestax VRX-2000 are placed connectors: XLR balanced left/right audio input and unbalanced audio input standard L/R RCA sockets and ground terminal.

Tip: this Vestax premium vintage product will be refurbished, with standard 1 year warranty.

Notice: customers with valid / paid pre-orders have priority when ordering this product.

INFO: this product cannot be ordered if limited QTY will be reserved!

KEY FEATURES:

the Vestax VRX-2000 (JP) can give you superb results in the making of long-lasting Vinyl records for the experienced professional musician
built-in RIAA equalizer, 3 Band EQ utilizes a standard graphic EQ system to compensate for extreme incoming signal curves (nominal)
extreme Japanese engine torque, controlled by a 32 bit CPU processor and digital servo system generates a very stable rotation
speed select switch: selects the speed – 33 1/3 RPM or 45 RPM; pich control adjusts pitch of platter +/- 10%
built-in IONISER for reduces static build up and high quality professional stereo cutting head Made in Japan
manual rotation wheel to set the position of the cutting arm in the correct place on the vinyl blank disk
tracking arm: arm to hold cutting head and apply correct pressure, soft adjusts cutting pressure
blank disk for cutting capacity of 14 minutes of recording per side A / 14 minutes per side B
delicate sapphire cutting stylus with the life of the stylus 200-300 minutes
no cooling system is needed, can use a small power amplifier
slider arm base: mechanism to move the cutting arm
slider cam: locks the cutting arm in place
heater current meter: visual display of the level of heat applied to the cutting stylus
recording level volume control: to adjust the level of the incoming signal
VU level meters: a display of the input level signal left and right
robust legs with rubber and air bags (means better absorption)
product was restored, origin from demo stock (C-stock/used)
the power supply from 110V modified to the 230V / 50Hz
product refurbishing with 1 year warranty
type (JP) is modified to AC~230V

TECHNICAL PARAMETERS:

Motor	24-pole DC Engine, Quartz System, controlled by 32-bit CPU processor + digital servo
Drive type	Direct Drive
Torque	>4,7 kg/cm
Nominal speed	33⅓ RPM / 45 RPM
Rise to NS	<0,5 sec. (33⅓ RPM) 70°
Abberation	<0,07% W.R.M.S
Pitch / Ultrapitch	+/- 10% / none
Tone arm	A.S.T.S. (Anti Skipping Tone arm System),linear with continuously adjustable DSP
Max.pressure	≤7 g standard, DSP (Dynamic Stylus Pressure) +5 g extra
Frequency	20 Hz ～ 20 kHz (±3 dB)
Crosstalk	>65 dB
Distance S/N	>78 dB (IEC 98WTD)
Power supply	AC 230 V ～ 50/60 Hz
Power consumption	98 W
Dimension	454 x 196 x 365 mm
Weight	14,9 kg (netto)
Accessories	SA-22 LacquerDiscs™ - blank disk for cutting, (5 pcs) VAI-40 external USB soundcard (interface) VRX-2000 User Manual (brochure) VRX-2000 Training SV (brochure) VRX-2000 Spare Cutting Stylus (1 pc) Transport BLK Box

DOWNLOAD:

Vestax VRX-2000 - user manual

PHOTOGALERY:

Vestax VRX-2000 JP (detail of cutting head)

Vestax VRX-2000 JP (top panel without Ioniser)

Vestax VRX-2000 JP (accessories: VAI-40 USB soundcard)

PRODUCT VIDEO:

Currency Converter

You will immediately find out how much you will pay. Enter the amount of the product price in the EUR - € field and you will get the conversion to your local currency. Current exchange rates by the ECB (The European Central Bank), services provided by FreeCurrencyRates.com.

FreeCurrencyRates.com

Add comment

Name:
E-mail:
Title:
Message :
Security question :	Name of the capital city of Japan?

The highlighted fields are mandatory.

Comments - Overview

Order (Dennis, 13 Sep 2024 00:30:40) Reply | Show replies
I am thinking of purchasing this amazing machine. Is it possible to order now?

Re: Order (Vestax ADMIN, 13 Sep 2024 10:49:14) Reply
Hello, ordering this VRX-2000JP product will be possible at the moment when this product is released for sale (shopping cart active). Only 1pc available.

back