• e-shop
• Shopping Guide
• Latest Newsreel
• FAQ
• Catalogues
• Manuals
• User References
• Vestax Complete History

• Discounts and outlet|
• Accessories for turntables|
• Spare parts for turntables|
• Spare parts for controllers|
• Crossfaders|
• Input faders|
• Pitch faders|
• Rotary faders|
• Switches|
• Knobs and buttons|
• Connectors|
• Power supply units|
• Other spare parts|
• Merchandise|

Vestax CF-PCV Pro2 KIT

Original Japanese crossfader CF-PCV Pro2 KIT is replacement original Vestax crosfader with extended service life, designed for PMC-05Pro / PMC-05Pro2 Series / PMC-05Pro3 VCA Series or PMC-07 Series professional mixing consoles. Latest new version.

Variants: Vestax CF-PCV Pro2 KIT (PCV version) | € 169.00 | in stock Vestax CF-PCV Pro2 KIT (PMC version) | € 169.00 | in stock

Code: 4516184250389

€ 169.00

Availability: in stock

Currency Rates Today 1 $ CZK 1 € CZK

PRODUCT DESCRIPT:

Crossfader Vestax CF-PCV Pro2 KIT is designed for professional battle 2-channels mixing consoles Vestax PMC-05 Series, PMC-05Pro VCA Series. This type is also intended for Vestax  PMC-06 Series / PMC-06Pro Series / PMC-06Pro A Series (variants Silver or Gold) and PMC-07Pro Series. Not intended for PMC-06Pro T type only. The crossfader CF-PCV Pro2 KIT can also be used for the PMC-280 mixer, PMC-500 or QFO / QFO LE Series hybrid turntables. KIT is assembled with PCB module and 2 version of connectors, without TOP faceplate to mounting on the original crossfader panel. KIT is produced in 2 variants with different connectors for use with different types of Vestax mixers: PMC version = 4PIN connector;  PCV version = 5PIN connector. See here the CF-PCV Pro2 KIT wiring diagram according to the type of mixers. Key features are PCV™ technology of crossfader, horizontal style control-bar design (protection against dust) and durable system which adopted the shaft of the high quality.

The state-of-the-art PCV™ (Plastic Conductive Volume Technology) fader is equipped conductive plastic resistor element, horizontal style control-bar design (protection against dust) and durable system which adopted the shaft of the high quality. PCV™ crossfader is tested by accredited testing laboratories for 2 million passes / 1 million cycles (18 cycles / min., sliding noise level: less than 100mV). During this time, it must not lose the quality of the audio signal that passes through it To give you an idea, standard faders leave after about 100 000 cycles; these are the minimum guaranteed values. The CF-PCV Pro2 KIT crossfader has a precise metal mechanism and guide shafts along which the fader slider moves and thus has a completely precise position. As a result, friction is reduced, which leads to less wear and smoother fader movement. It is designed for professional applications, such as turntablism or professional club mixing consoles.

Tip: if you are unsure, consult our customer technical support before purchasing.

Before purchasing, check the connector version of CF connection cable in your mixer.

 

KEY FEATURES:

• premium original crossfader with PCV™ Japanese technology brings reduced friction, less wear, smoother fader movement, long service life
• PMC version (4 PIN connector ¹) designed for PMC-05Pro / PMC-05Pro2 / PMC-05Pro3 / PMC-05Pro3 VCA / PMC-05 SL / PMC-05 DX mixers
• PMC version ¹ intended for PMC-06Pro A / PMC-06Pro VCA / PMC-07Pro / PMC-07PRO ISP / PMC-500 / PMC-280 / QFO / QFO LE - LE DX
• PCV version (5 PIN connector ²) for PCV-003 / PCV-150 / PCV-175 / PCV-180 / PCV-275 / PMC-250 / VMC-180 / VMC-180XL / VMC-185XL
• PCV version ² also for VMC-002 / VMC-004 / VMC-002XL / VMC-004XL / VMC-004FX / VMC-002XLu / VMC-004XLu / VMC-004FXu
• high quality and top mechanical endurance of original faders by TKD™ for Vestax Japan
• used the latest technologies implemented also in contactless crossfaders
• crossfader is tested and meets the manufacturer's requirements 
• stroke length 45mm ±0.5mm with operating force 0~0,2 N
• this is an premium original replaceable part of Vestax
• sliding noise level ≤ 47mV or less (by JIS C 6443)
• attached parts M3 screw (panel THK + 3mm)
• supplied with SLV KNOB without faceplate
• user-easy and fast installation

 

DOWNLOAD:

Install Manual Vestax CF-PCV Pro2 KIT (2,20 MB)
Table of compatibility CF, IF, DF (1,85 MB)

 

PHOTOGALERY: