Home » E-shop » Discounts and outlet » Vestax VRX-2000 (r)

Vestax VRX-2000 (r)

Expected:

May 2024

PRODUCT DESCRIPTION:

The VRX-2000 vinyl cutting machine can give you superb results in the making of long-lasting vinyl records. To achieve such results, please remember that the mastering process of vinyl records requires skill and a basic understanding of complicated audio waveforms. Cutting vinyl from a cassette-based multi-track recording or a stereo cassette recorder should prove to be straight forward, as the frequency response of cassette-based music is not as intense as that of a CD. Cutting from professionally mastered CDs that have good equalization and compression should also give excellent results. However, recording from some CDs (for example, CDs from home studio set-ups) may provide difficulties. This is due to the fact that these recordings sometimes have very wide frequency ranges, and have not been prepared professionally for mass-production or broadcast. Please study and understand compressors and limiters and how to use equalizers to get the best result from your Vestax VRX-2000. view full description »

The VRX-2000 head frequency equalisation is equipped 3 Band EQ. The manner by which the cutting head reacts to various frequencies will affect the final output. Basically, the cutting head is like a very small yet powerful speaker when it reacts to various s ound frequencies. Extreme frequencies will cause it to move rathers everely, with that movement being further reflected in the sound recorded. The Vestax VRX-2000, however, utilizes a standard graphic EQ system to compensate for extreme incoming signal curves. This system is aurally difficult and requires hours of practice and experimentation to get it perfect over and over again. The cutting head has 2 magnetic drivers separated by a 90 degree angle creating a V shape. This layout is optimum for stereo signal recording with the best possible channel separation, and best balance.

The special blank vinyl for the VRX-2000 has a similar durability of commercial vinyl, but a record cut in improper circumstances/condition may have less durability than usual. The life of the cutting stylus is approximately between 200-300 minutes (depending on the cutting pressure used and the level of stylus heat). Vestax VRX-2000 has a built-in limiter bypass switch: turns the internal compressor limiter ON or OFF. Must always be in on position unless external compressor limiter devices are used in the cutting process. Input level select switch: adjusts the input gain +4dB / 0dB/ -10dB and Phono level output jacks: standard RCA L/R output jacks for playback. On rear side of Vestax VRX-2000 are placed connectors: XLR balanced left/right audio input and unbalanced audio input standard L/R RCA sockets and ground terminal.

Tip: this Vestax premium vintage product will be refurbished, with standard 1 year warranty.

Notice: customers with valid / paid pre-orders have priority when ordering this product.

Info: this offer available for ordering, only announced quantity will be for sale!

KEY FEATURES:

the Vestax VRX-2000 can give you superb results in the making of long-lasting Vinyl records for the experienced professional musician
built-in RIAA equalizer, 3 Band EQ utilizes a standard graphic EQ system to compensate for extreme incoming signal curves (nominal)
extreme Japanese engine torque, controlled by a 32 bit CPU processor and digital servo system generates a very stable rotation
speed select switch: selects the speed – 33 1/3 RPM or 45 RPM; pich control adjusts pitch of platter +/- 10%
built-in IONISER for reduces static build up and high quality professional stereo cutting head Made in Japan
manual rotation wheel to set the position of the cutting arm in the correct place on the vinyl blank disk
tracking arm: arm to hold cutting head and apply correct pressure, soft adjusts cutting pressure
blank disk for cutting capacity of 14 minutes of recording per side A / 14 minutes per side B
delicate sapphire cutting stylus with the life of the stylus 200-300 minutes
no cooling system is needed, can use a small power amplifier
slider arm base: mechanism to move the cutting arm
slider cam: locks the cutting arm in place
heater current meter: visual display of the level of heat applied to the cutting stylus
recording level volume control: to adjust the level of the incoming signal
VU level meters: a display of the input level signal left and right
robust legs with rubber and air bags (means better absorption)
product was restored, origin from demo stock
the power supply adjusted to the 230V / 50Hz
product refurbishing with warranty

TECHNICAL PARAMETERS:

Motor	24-pole DC Engine, Quartz System, controlled by 32-bit CPU processor + digital servo
Drive type	Direct Drive
Torque	>4,7 kg/cm
Nominal speed	33⅓ RPM / 45 RPM
Rise to NS	<0,5 sec. (33⅓ RPM) 70°
Abberation	<0,07% W.R.M.S
Pitch / Ultrapitch	+/- 10% / none
Tone arm	A.S.T.S. (Anti Skipping Tone arm System),linear with continuously adjustable DSP
Max.pressure	≤7 g standard, DSP (Dynamic Stylus Pressure) +5 g extra
Frequency	20 Hz ～ 20 kHz (±3 dB)
Crosstalk	>65 dB
Distance S/N	>78 dB (IEC 98WTD)
Power supply	AC 230 V ～ 50/60 Hz
Power consumption	98 W
Dimension	454 x 196 x 365 mm
Weight	14,9 kg (netto)
Accessories	SA-22 LacquerDiscs™ (blank disk for cutting, 20 pcs) VRX-2000 User Manual (brochure) VRX-2000 Training SV (brochure) VRX-2000 Spare Cutting Stylus (1 pc)

DOWNLOAD:

Vestax VRX-2000 - user manual

PHOTOGALERY:

Vestax VRX-2000 (detail of cutting head)

PRODUCT VIDEO:

Currency Converter

You will immediately find out how much you will pay. Enter the amount of the product price in the EUR - € field and you will get the conversion to your local currency. Current exchange rates by the ECB (The European Central Bank), services provided by FreeCurrencyRates.com.

FreeCurrencyRates.com

Add comment

Name:
E-mail:
Title:
Message :
Security question :	Name of the capital city of Japan?

The highlighted fields are mandatory.

Comments - Overview

Inquiry About Availability of VRX-2000 Vinyl Cutting Machine (Isaac Robinson, 29 Aug 2023 17:12:00) Reply | Show replies
I am writing to inquire about the current availability of the VRX-2000 Vinyl Cutting Machine. I recently came across information about this machine and its exceptional capabilities in producing high-quality vinyl records, which greatly piqued my interest... (more in mail)

Re: Inquiry About Availability of VRX-2000 Vinyl Cutting Machine (Vestax ADMIN, 25 Jan 2024 08:33:15) Reply
Dear, If you need advice on the manuals for this VRX-2000 cutter, you can find them in the Download/Manuals section on websites. Well you go there also a special VRX-2000 Training manual. We do not have specific information on availability at this time, because the our service department is still out of order (see article in Newsreel). You can find practical information about this machine and its options in the Manuals section (where is also recommended special Training manual).

Svedek (Patrik Svedek, 3 Nov 2023 20:04:17) Reply | Show replies
good day, what would be the price including postage to Slovakia, Vestax VRX-2000

Re: Svedek (Vestax ADMIN, 25 Jan 2024 08:39:28) Reply
Dear friend, we sent you the key information by email; the shipping price is based on weight (approx. 17kg btto). Details and more info about shipping can be found in the Shopping Quide section. Thank You.

Re: VRX 2000 (Andrew Morrison, 23 Mar 2024 09:07:49) Reply
hello, please can you send the price and postage cost to UK

Vrx200 (Jörg Henze, 23 Mar 2024 20:53:00) Reply | Show replies
Hello, What will be the price for the product? Thx in advance. Best, Wjh

Re: Vrx200 (Vestax Customer Support, 31 Mar 2024 18:03:20) Reply
Hello, the price ranges from $4,296 to $4,425 (it depends on the cost of refurbishing).

Pricing (Lyall, 27 Mar 2024 15:30:00) Reply | Show replies
Hi. Can you please advise pricing for this unit, I see it becomes available in April 2024?

Re: Pricing (Vestax ADMIN, 31 Mar 2024 18:06:29) Reply
Hi, the price ranges from $4,296 to $4,425 (it depends on the cost of refurbishing). When this product will be ready for refurbishing, then the option to buy it: pre-order becomes available on store.

Whats the Price (Daniel Blum, 12 Apr 2024 10:00:00) Reply | Show replies
can you tell me a price of one unit with shipping to germany please. Thanks Daniel at shizoworld.de

Re: Whats the Price (Vestax ADMIN, 15 Apr 2024 10:00:43) Reply
Hello, the price ranges from $4,296 to $4,425 (it depends on the cost of refurbishing). When this product will be ready for refurbishing, then the option to buy it: pre-order becomes available on store. Shipping to Germany cost approx 100€.

mr (hasan younas, 13 Apr 2024 11:03:00) Reply | Show replies
Hi intrested in buying vestax vrx 2000 please could you advise. Thanks

Re: mr (Vestax ADMIN, 15 Apr 2024 10:05:28) Reply
Hello, we send further detailed information about the technical condition and possibilities of this VRX cutter in an email, orders will be allowed after the cost of its restoration will be assessed. The price may change accordingly.

back